300x600
DIY Light Bulb Vase
This week we’re sharing some of the blog’s greatest hits! These are some of our most loved posts by you, our amazing readers.
Don’t throw away those old light bulbs just yet! I have a fun, easy DIY for you that will brighten up your home decor or workspace :) This DIY is very simple, but it requires working with glass so you definitely need to be careful!
What you need: A light bulb (any shape or size will work!), pliers and gardening wire.
Step One: First you need to remove the little silver layer on the bottom of the light bulb. Work the pliers under the layer to create a little lip, and then you should be able to peel it right off with the pliers.
Step Two: Now you have to remove the black cap from the bottom of the light bulb. This was the most difficult part for me – you DEFINITELY want to wear safety goggles and be extremely careful, as it is glass. Some sites suggest using a hammer to crack the black glass but this didn’t work for me – with some time, I was able to work the pliers into the hole left after you remove the silver cap, and snap the glass. I used the pliers to tap the rest of the black glass off the bulb. Do this outdoors or over a hard surface so you can sweep up the bits of glass.
Step Three: Once the black glass was removed it was really easy to get the little glass tube and wiring on the inside of the bulb out – I simply tapped it with the pliers and it broke right off.
And now you have your empty lightbulb! I didn’t like how the metal part looked so I covered it with a little piece of fabric:
Step Four: Add flowers and water, and hang with the gardening wire!
Now I want to make more! In addition to brightening up my desk space at work, these would be adorable for a summer party or, as Jemma just suggested as I was making it, as bathroom decor!
0 Komentar